Forget Password
+98 (21)44287250

Windows Vista L2TP VPN Setup

Installation Guide for L2TP
Setting up AVANETCO connection under Windows Vista is simple. The following instructions will take you through the setup creation process step–by–step . These instructions work under all client–side variations of Windows Vista namely Home Basic, Home Premium, Business, and Ultimate.

For Ready Connection :

PPTP Windows Connection :

L2TP Windows Connection :

SSTP Windows Connection :

For Manual Connection Following Steps:

STEP 1: Click "Start" and go to "Control Panel"

STEP 2: Click on "View Network Status and tasks" under "Network and Internet" tab.

STEP 3: Under "Network and Sharing Center” tab click on "Connect to a network ".

STEP 4: Click "Setup a connection or network"

STEP 5: Select "Connect to a workplace" and click "Next"

STEP 6: Click "Use my Internet Connection (VPN)".

STEP 7: Enter "Internet address" of your choice from the many provided in configuration email (the same email that contains your user name and pass). Destination name should be AVANETCO. Check mark "Don't connect now; just set it up so I can connect later". Hit "Next"..

STEP 8: Enter user name and password as provided in configuration email (This is NOT same as your client area login details). Leave Domain field empty and check mark Remember this password if you do not wish to enter login detail every time. Hit "Create".

STEP 9: Without clicking "Connect now" hit "Close".

STEP 10: Click on the computer icon in system tray and click on connect to a network.

STEP 11: Click on connect.

STEP 12: You will see this window. Click on “Properties”.

STEP 13: Verify the internet address you entered earlier. Go to "Networking" tab.

STEP 14: Select "L2TP IPSec" as shown.

STEP 15: Click on "IPsec Settings" button, a window will popup.

STEP 16: Select "Use Pre-shared key for authentication" and insert key as 1020304050. Hit "OK".

STEP 17: Uncheck "Internet Protocol Version 6 (TCP/IPv6)" and "File and Printer Sharing for Microsoft Networks". Leave others as they are. Click OK and you are done.

STEP 18: This message will inform you that your connection credentials are being verified.

STEP 19: You are now connected to AVANETCO, click close.

STEP 20: Click on Public Location when this window appears.

STEP 21: Click close.

STEP 22: Click on computer Icon in system tray. Newly created PureVPN connection can be seen. Enjoy the Freedom.