Forget Password
+98 (21)44287250

Windows 7 L2TP VPN Setup

Windows7 Installation Guide for L2TP VPN Setup

Setting up AVANETCO under Windows 7 is simple. The following instructions will guide you through a manual connection of the AVANETCO service on Windows 7 machines.

For Ready Connection:

PPTP Windows Connection :

L2TP Windows Connection :

SSTP Windows Connection :

For Manual Connection Following Steps:

STEP 1 : Click "Start" and go to "Control Panel".

STEP 2 : Click "View network status and tasks" under Network and Internet.

STEP 3: Click "Set up a new connection or network".

STEP 4: Select "Connect to a workplace" and then hit "Next".

STEP 5: Click "Use my Internet Connection (VPN)".

STEP 6: Enter "Internet address" of your choice from the many provided in configuration email (the same email that contains your user name and pass). Destination name should be "AVANETCO Connection". Check mark "Don't connect now; just set it up so I can connect later". Hit "Next"..

STEP 7: Enter user name and password as provided in configuration email (This is NOT same as your client area login details). Leave Domain field empty and check mark Remember this password if you do not wish to enter login detail every time. Hit "Create".

STEP 8: Without clicking "Connect now" hit "Close".

STEP 9: Click on the computer icon in system tray and you will see the newly created VPN connection. Click on “Connect”.

STEP 10: You will see this window. Click on “Properties”.

STEP 11: You will see the internet address you entered earlier. This is just a confirmation, verify it here and then click on "Security" tab.

STEP 12: Select "Layer 2 Tunneling Protocol" as shown.

STEP 13: Click on "Advanced Settings" button, a window will popup.

STEP 14: Select "Use Pre-shared key for authentication" and insert key as 1020304050. Hit "OK".

STEP 15: Go to "Networking" tab and uncheck "Internet Protocol Version 6 (TCP/IPv6)" and "File and Printer Sharing for Microsoft Networks". Leave others as they are. Click OK and you are done.

STEP 16: Now click on “Connect”.

STEP 17: This message will confirm that your VPN connection is establishing.

STEP 18: Click on computer Icon in system tray. Newly created AVANETCO connection can be seen.

STEP 19: Click on Public Network when this window appears

STEP 20: Click close. Enjoy the Freedom.